Mercedes-Benz Sprinter · Sprinter L2H2 FWD
Mercedes-Benz Sprinter L2H2 Weekender
Inspect the source arrangement at scale, then carry its main furniture footprints into your own build.
Reference layout · review against your own measurements
The plan at a glance
- Interior length
- 3.272 m
- Interior width
- 1.787 m
- Interior height
- 2.079 m
- Drive
- FWD
- Source components
- 25
- Furniture footprints
- 2
Review a new draft before saving. Existing projects are not changed, and vehicle masses and price quotes are left for you to confirm.
Main furniture footprints and the vehicle's reference floor dimensions. Small fittings and stacked construction parts remain available in this library preview.
Source routing is listed below for reference. Prices, equipment masses, electrical ratings, tank capacities and measured axle weights are not guessed or copied into confirmed project fields.
All source components
Updating results…
| Component | Length × width × height | Group / mount |
|---|---|---|
| Frame panel (2×2) | 0.045 m × 1.351 m × 0.88 m | floor |
| Frame panel (2×2) | 0.045 m × 1.351 m × 0.88 m | floor |
| Battery 105Ah | 0.35 m × 0.24 m × 0.22 m | Bed & garage |
| Inverter | 0.35 m × 0.25 m × 0.12 m | Bed & garage |
| Water pump | 0.2 m × 0.12 m × 0.12 m | Bed & garage |
| Bed slat | 1.38 m × 0.12 m × 0.018 m | Bed & garage |
| Bed slat | 1.38 m × 0.12 m × 0.018 m | Bed & garage |
| Bed slat | 1.38 m × 0.12 m × 0.018 m | Bed & garage |
| Bed slat | 1.38 m × 0.12 m × 0.018 m | Bed & garage |
| Bed slat | 1.38 m × 0.12 m × 0.018 m | Bed & garage |
| Bed slat | 1.38 m × 0.12 m × 0.018 m | Bed & garage |
| Bed slat | 1.38 m × 0.12 m × 0.018 m | Bed & garage |
| Bed slat | 1.38 m × 0.12 m × 0.018 m | Bed & garage |
| Bed slat | 1.38 m × 0.12 m × 0.018 m | Bed & garage |
| Bed slat | 1.38 m × 0.12 m × 0.018 m | Bed & garage |
| Mattress (double) | 1.73 m × 1.34 m × 0.18 m | Bed & garage |
| Pillow | 0.55 m × 0.38 m × 0.12 m | Bed & garage |
| Pillow | 0.55 m × 0.38 m × 0.12 m | Bed & garage |
| Kitchen Counter | 1.4 m × 0.6 m × 0.9 m | floor |
| Hob (2 zone) | 0.58 m × 0.35 m × 0.06 m | floor |
| Sink basin | 0.42 m × 0.36 m × 0.06 m | floor |
| Tap | 0.06 m × 0.18 m × 0.25 m | floor |
| Overhead locker | 0.9 m × 0.35 m × 0.35 m | ceiling |
| Gas Bottle | 0.32 m × 0.32 m × 0.6 m | floor |
| Roof Vent | 0.4 m × 0.4 m × 0.15 m | roof |
Source systems routing
- 12 V main: battery → galley4 waypoints · 3.131 m before slack
Catalog dimensions and nominal payload are planning references. Equipment, model year and market change the available space and mass. Measure your van, read its VIN plate and use measured axle weights before deciding a build is within limits.
Imported from the public vehicle data captured on 2026-11-07. Missing ratings stay unknown; catalog curb mass is never used as a measured baseline.
Template source: Mercedes-Benz Sprinter L2H2 Weekender on VanPlot. Coordinates were generated from the captured source template logic; validate the plan against your own vehicle before fabrication.