Compressor fridge (typical)
DC · 1 × 50 W · 33% running duty
— Wh/day
battery-side energy
Device details & assumptions
The fraction of the selected time the device actively draws its rated power. A cycling fridge may run for only part of the day.
Electrical
Start with what you use. Build a balanced electrical plan for the way you travel.
Daily use
735 Wh/day
Battery needed at 12 V
136.1 Ah
Charging − use
+789 Wh/day
Battery sizing for 2 days without charging at 90% usable capacity. This is a recommended capacity, not a simulation of an installed battery. Charging uses the sources configured below.
Enter 0 if no array is planned. Adjust sun hours and other charging sources below.
Charging assumptions: DC–DC 30 A for 1 h/day; shore charger 20 A for 0 h/day; solar derating 75%.
Updating results…
Add the equipment you use
Preset values are typical, editable starting points. Check the label on your equipment.
Adjust hours and watts directly. Open a device’s details for quantity, duty cycle and startup behaviour.
DC · 1 × 50 W · 33% running duty
— Wh/day
battery-side energy
The fraction of the selected time the device actively draws its rated power. A cycling fridge may run for only part of the day.
DC · 1 × 10 W · 100% running duty
— Wh/day
battery-side energy
The fraction of the selected time the device actively draws its rated power. A cycling fridge may run for only part of the day.
AC · 1 × 65 W · 100% running duty
— Wh/day
battery-side energy
The fraction of the selected time the device actively draws its rated power. A cycling fridge may run for only part of the day.
Current assumptions: inverter efficiency 90%, usable battery fraction 90%, peak sun hours 4. Expand to inspect and edit all settings.
Calculation profile
ABYC E-11-derived planning · 105°C stranded copper. Country selection supplies installation references, not a compliance certificate.
Local installation reference: No local compliance profile verified; confirm with the relevant authority
Check local adoption and installation requirements. This tool does not certify an installation.
Equivalent full-power sun hours, not hours of daylight. Use a value for your actual travel location, season, flat roof and shading. No location lookup is used.
Results depend on the values and conditions you enter. Review the stated assumptions, equipment documentation and result limitations before making a purchase or starting installation.
The bank must cover your chosen number of days and leave the unused portion required by your depth-of-discharge setting.
No. A country can span very different climates. Enter local seasonal peak sun hours or monthly values for your actual travel plans.
Check the appliance start-up demand, inverter surge duration and manufacturer instructions. The multiplier here is a planning allowance.