Three bounded sources
Plan solar, driving and shore charging separately. Record the array rating, expected conditions and actual charging schedules. For DC–DC and shore chargers, use the battery-side DC output rating rather than the AC inlet breaker rating. Check combined charger and battery acceptance limits against the equipment documentation.
Controller and cable limits come next
Array voltage, cold Voc, controller input current, and cable ampacity are separate checks. The solar & battery planner sizes energy; wire sizing covers conductors; advanced MPPT checking (when enabled) evaluates cold Voc and controller windows without requiring a brand SKU.
Formula assumptions
- Solar derate covers dirt, angle, and temperature as a single planning fraction unless you model them separately.
- Driving and shore hours are schedules you control, not automatic daily guarantees.
- Daily energy estimates do not enforce every equipment limit. Enter bounded source schedules and a shared battery charging limit in the timeline tool when available.
Worked example
200 W array at 4 peak sun hours
- Enter the planned array rating and peak sun hours appropriate to your route and season.
- Add the DC–DC charger output rating and a realistic daily driving schedule.
- Review the charging balance against your load inventory, then plan for days with less sun or driving.
The Weekend couple example uses these planning orders of magnitude. Edit sun hours and driving hours to match your route.
Limitations
- First-pass tools are daily energy balances, not minute-by-minute SOC timelines (timeline simulation is a separate advanced tool when enabled).
- Alternator temperature limits and smart isolator behaviour need vehicle-specific design.
- Shore inlet breakers and shore-power standards vary by region.
Sources
- NREL National Solar Radiation Database (peak sun hour context)Use published irradiance data for your region when choosing peak sun hours; VanSchema does not fetch a location for you in the first release.
- Charge-controller manufacturer absolute Voc / current limitsRead the actual controller manual for absolute voltage, current and permitted array oversizing.
Questions
Can I enter zero sun hours?
Yes. Zero is a valid planning case for deep winter or indoor storage. The tool should not invent sunshine to make the chart look healthy.
Does more solar automatically raise battery Ah?
No. Solar yield and battery capacity are separate decisions. Raising watts does not rewrite your linked Ah specification.