Vai al contenuto

Electrical

Wire size & fuse calculator

A clear answer for your next DC circuit. Check voltage drop, ampacity and fuse coordination together.

Jump to resultsAll tools
01 / Circuit inputs
What do you know about this circuit?
m

From source to load. The return conductor is included automatically.

Allowed voltage drop (%)

Current installation: 2 bundled conductors · engine space: no · sustained load: no. Review these below.

Installation conditions & regional settings

Calculation profile

ABYC E-11-derived planning · 105°C stranded copper. Country selection supplies installation references, not a compliance certificate.

Local installation reference: No local compliance profile verified; confirm with the relevant authority

Check local adoption and installation requirements. This tool does not certify an installation.

Inputs & assumptions

Results depend on the values and conditions you enter. Review the stated assumptions, equipment documentation and result limitations before making a purchase or starting installation.

Voltage drop along a DC runLonger runs and higher current increase voltage drop. Size the conductor so drop and ampacity both stay within your limits.SourceRun lengthConfirm the load, cable route and installation conditionsLoad
Voltage drop along a DC runLonger runs and higher current increase voltage drop. Size the conductor so drop and ampacity both stay within your limits.
Questions before you build
Why do short cables sometimes need to be thick?

A short run can pass the voltage-drop check and still fail the heat or fuse check. The larger requirement sets the conductor size.

Can I use the chassis as the negative return?

This calculator models a positive and a negative copper conductor. Chassis-return resistance and connections need a separate installation assessment.

Is the mm² figure a metric cable recommendation?

The AWG equivalent area describes the selected conductor. The separate standard metric figure checks voltage drop only; its thermal rating must be checked with the cable manufacturer.

Calculation sources

Numeric marine reference; not RV certification. mm² shown for an AWG cable is its equivalent conductor area, not an independently rated metric cable.

ABYC-derived 105°C stranded-copper planning profile