Fiat Ducato · Ducato L3H2 FWD
Fiat Ducato L3H2 Family camper
Inspect the source arrangement at scale, then carry its main furniture footprints into your own build.
Reference layout · review against your own measurements
The plan at a glance
- Interior length
- 3.705 m
- Interior width
- 1.87 m
- Interior height
- 1.932 m
- Drive
- FWD
- Source components
- 32
- Furniture footprints
- 4
Review a new draft before saving. Existing projects are not changed, and vehicle masses and price quotes are left for you to confirm.
Main furniture footprints and the vehicle's reference floor dimensions. Small fittings and stacked construction parts remain available in this library preview.
Source routing is listed below for reference. Prices, equipment masses, electrical ratings, tank capacities and measured axle weights are not guessed or copied into confirmed project fields.
All source components
Updating results…
| Component | Length × width × height | Group / mount |
|---|---|---|
| Frame panel (2×2) | 0.045 m × 1.362 m × 0.782 m | floor |
| Frame panel (2×2) | 0.045 m × 1.362 m × 0.782 m | floor |
| Bicycle | 1.247 m × 0.492 m × 0.722 m | Bed & garage |
| Water tank 125L | 0.8 m × 0.45 m × 0.35 m | Bed & garage |
| Gas Bottle | 0.32 m × 0.32 m × 0.6 m | Bed & garage |
| Water pump | 0.2 m × 0.12 m × 0.12 m | Bed & garage |
| Battery 105Ah | 0.35 m × 0.24 m × 0.22 m | Bed & garage |
| Inverter | 0.35 m × 0.25 m × 0.12 m | Bed & garage |
| Bed rail | 1.42 m × 0.045 m × 0.07 m | Bed & garage |
| Bed rail | 1.42 m × 0.045 m × 0.07 m | Bed & garage |
| Bed slat | 0.12 m × 1.82 m × 0.018 m | Bed & garage |
| Bed slat | 0.12 m × 1.82 m × 0.018 m | Bed & garage |
| Bed slat | 0.12 m × 1.82 m × 0.018 m | Bed & garage |
| Bed slat | 0.12 m × 1.82 m × 0.018 m | Bed & garage |
| Bed slat | 0.12 m × 1.82 m × 0.018 m | Bed & garage |
| Bed slat | 0.12 m × 1.82 m × 0.018 m | Bed & garage |
| Bed slat | 0.12 m × 1.82 m × 0.018 m | Bed & garage |
| Bed slat | 0.12 m × 1.82 m × 0.018 m | Bed & garage |
| Mattress (double) | 1.82 m × 1.35 m × 0.18 m | Bed & garage |
| Pillow | 0.55 m × 0.38 m × 0.12 m | Bed & garage |
| Pillow | 0.55 m × 0.38 m × 0.12 m | Bed & garage |
| Duvet, folded | 1.1 m × 0.5 m × 0.08 m | Bed & garage |
| Overhead locker | 0.9 m × 0.35 m × 0.35 m | ceiling |
| Overhead locker | 0.9 m × 0.35 m × 0.35 m | ceiling |
| Kitchen Counter | 1.4 m × 0.6 m × 0.9 m | floor |
| Fridge | 0.55 m × 0.55 m × 0.85 m | floor |
| Hob (2 zone) | 0.58 m × 0.35 m × 0.06 m | floor |
| Sink basin | 0.42 m × 0.36 m × 0.06 m | floor |
| Tap | 0.06 m × 0.18 m × 0.25 m | floor |
| Overhead locker | 0.9 m × 0.35 m × 0.35 m | ceiling |
| Wardrobe | 0.6 m × 0.6 m × 1.8 m | floor |
| Roof Vent | 0.4 m × 0.4 m × 0.15 m | roof |
Source systems routing
- 12 V main: battery → galley4 waypoints · 3.368 m before slack
- Fresh water: tank → sink4 waypoints · 3.626 m before slack
Catalog dimensions and nominal payload are planning references. Equipment, model year and market change the available space and mass. Measure your van, read its VIN plate and use measured axle weights before deciding a build is within limits.
Imported from the public vehicle data captured on 2026-11-07. Missing ratings stay unknown; catalog curb mass is never used as a measured baseline.
Template source: Fiat Ducato L3H2 Family camper on VanPlot. Coordinates were generated from the captured source template logic; validate the plan against your own vehicle before fabrication.